LTP Porcelain Tile Protector is a water based pre-grout treatment for interior & exterior use on all types of textured porcelain tile surfaces. Helps with grout and jointing compound release. On exterior surfaces a further coat of LTP Porcelain Tile Protector can be applied after grouting, which will help with the removal of stains from organic matter, as well as facilitating future maintenance.

Directions for use:

Preparation: Ensure surface to be treated is completely clean, dry and free from dirt, grime, cement and grout. If necessary, first wash surfaces with a dilute solution of LTP Grimex 1:5 and white pad. Rinse well with clean water to remove residues and leave to dry naturally.

Application: Shake bottle before use. Before grouting apply LTP Porcelain Tile Protector evenly to the surface using a broad paint brush, foam roller or light pressure sprayer. Allow to dry for 30 minutes. Apply a second coat after 30 minutes then leave to cure for a minimum of 1 hour before grouting or pointing. Once pointing is dry and all residues have been removed a further coat of LTP Porcelain Tile Protector can be applied covering the joints as well.

Aftercare: We recommend routinely sweeping and washing the treated surface to avoid buildup of detritus and dirt. Clean walls, floors and work surfaces with LTP Porcelain Floor Tile Cleaner. Dried on cement stains and other stains that are hard to remove can be removed using LTP Grout Stain Remover or LTP Cement, Grout & Salt residue remover. Hard to remove stains from jointing compounds can be removed using LTP Solvex. Empty containers are recyclable. Active ingredients are water soluble and inert once cured.

Do not use this product in temperatures under 5°C or over 25°C. Clean application tools and brushes with clean water after use.

Coverage:
Lower porosity surfaces: 30m² per Litre.

Technical data sheet